e-capsule

The e-Capsule™ is a bio-resonance storage device. It can be programmed and charged during an e-Lybra® balancing session with Vibrational and informational patterns. These patterns once programmed into the e-Capsule™ will continue to resonate for a minimum of 3 months at which point the strength of the patterns will start to decrease until reprogrammed again.

The casing is in 2 layers made from brass and copper and is finished in polished chrome. The inner casing contains a specially selected mineral lattice which has an inherent subtle electromagnetic field emanating from its programmable matrix.

The e-Capsule™ can be used in place of Homeopathic drops or tablets. In tests the therapeutic value of drops and tablets on a comparable scale is about 35% whereas the therapeutic value of the e-Capsule™ is 70%. The therapeutic value of the e-Capsule™ may further be enhanced to 100% when the e-Capsule™ is placed on the Docking Station™.

Technicalities:

On one end of the e-Capsule™ there is a radio frequency identity tag (RFID). This electronic tag contains a unique identity number which is used to identify the e-Capsule™ when using the e-Lybra system. For ease of reference this number is also laser etched on the other end of the e-Capsule™ as a visual reference.

The e-Lybra® 9 system has a built-in e-Capsule RFID reader conveniently located on the right hand side of the main base unit. This allows the e-Lybra software to read the unique RFID tag of the e-Capsule™ so that the Practitioner can find the client details associated with the e-Capsule™ more quickly.

Instructions for use with the e-Lybra 9 System

1. If this is a new e-Capsule™ then go to “Copy/Clear Pattern Screen 17” and run the ‘Clear A and B’ program accessed from the ‘Copy’ button from the top tool bar, make sure that the ‘Repeat’ option is set to 5. It is advisable to do this every time a client returns an e-Capsule™ and for re-use by another person.

2. Once the clearing has taken place then the e-Capsule™ may be used for a client.

3. To record the RFID tag number etched on the end of the e-Capsule™, open the appropriate client details file “Client Record Screen 8”. Press the ‘e-Capsule’ button and then place the black end of the e-Capsule over the “Scan Here” label which is located on the right hand side of the e-Lybra® 9.

4. The e-Capsule™ can be placed in ‘Well B’ of the e-Lybra base unit at the beginning of the session and removed at the end, or can be placed in ‘Well B’ at the point when the final ‘Prescribed Patterns’ are ready to download. This depends on the practitioner preference and experience.

5. An individual Formula may be downloaded to the e-Capsule™.

6. The e-Capsule™ can also be used during a ‘Remote’ session as it contains a unique identifier and a direct link between the e-Lybra® system and the client. It is advisable for the e-Capsule™ to be in the possession of the client whilst they are receiving their remote session. The e-Capsule™ gets updated during each and every ‘Remote’ session for the client.

7. The e-Capsule™ may also be sent by post to the client. If the e-Capsule™ has been programmed, it should be wrapped in foil before sending.

• If a client has finished with the e-Capsule™ and it is returned for further use, it is important to remove the RFID tag number from the Clients Records. The e-Capsule™ should ‘cleared’ as described in point 1 above.
• The e-Capsule™ becomes active when in the proximity of the client. The client may wear the e-Capsule in a pocket, held in their hand, or it may be placed under their pillow at night. It works best within 3 inches of the body. It works best with animals if it is in their bedding or, in the case of larger animals, safely and suitably attached in a blanket or a strap.
• The e-Capsule™ is designed to also work with a Docking Station™ which amplifies the signal to fill an area of a medium sized room.
• Do not immerse in water. Clean with soft damp cloth.
• The e-Capsule™ is 50 mm long and 25 mm diameter in size and is finished in polished chrome.
• The e-Capsule™ is 100 grams in weight.

For more detailed images please click on the "Further Information" tab of this product page.